$20.80
A brake push rod translates pedal or linkage movement into the pressure that sets the brakes on Crown lift trucks, a slim steel rod about 5 inches long that reaches between the actuating point and the component it drives. Because it works in compression, straightness is what matters most; a rod that is bent, mushroomed at an end, or worn at its contact tip loses travel and softens brake response.
Straight-line force is all a brake push rod does, translating pedal or linkage movement into the pressure that sets the brakes on Crown lift trucks. It measures about 5 inches long on a roughly quarter-inch shaft, a slim steel rod sized to reach between the actuating point and the component it drives.
Because a push rod works purely in compression along its axis, straightness is what matters most; a rod that is bent, mushroomed at an end, or worn at its contact tip loses travel and softens the brake response, which is when it gets swapped. At about two and a half ounces it adds almost no mass to the assembly, and its job is simply to carry motion faithfully from one point to the next. When fitting a replacement, match the rod length to the one coming off, since push rod length sets the free travel before the brake begins to engage.
| Type | Brake push rod |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR102816-001 |
| Weight (lbs) | 0.15 |
| Length (in) | 5.00 |
| Width (in) | 0.25 |
| Height (in) | 4.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR102816-001 |
|---|---|
| Product ID | 12328 |
| Short Link | https://forkliftsetc.net/?p=12328 |
| OEM Number | CR102816-001 |
| Part Number |
|---|
| 800014894 |
| CR102816-001 |
| CR102816-1 |
| SY99-01062 |
| TSA-800014894 |
| TSA-CR102816-001 |
| TSA-CR102816-1 |
| TSA-SY99-01062 |
