Crown Electric Brake – CR148218

Crown builds this electric brake for its line of electric lift trucks, where it works as the spring applied, electrically released holding brake that stops and parks the truck the moment drive power is cut. With power on, the brake stays released and the truck drives freely; when the operator steps off or the circuit de-energizes, springs clamp the friction surfaces and hold the load in place, which is what makes it both the parking brake and the emergency stop on an electric machine.

At about 11 pounds, it is a substantial assembly built to absorb repeated stops across a full duty cycle without fading. The friction faces and springs are the wear items, and a brake that drags, slips, or holds weakly on a grade is signaling that its friction material has worn or its spring force has relaxed. Fitting a fresh Crown brake restores full holding torque and predictable stopping on the trucks it was cataloged for. Match the brake to the Crown drive motor mounting it bolts to so the replacement seats and engages exactly as the original did.