$1,227.27
Raymond catalogs this brake assembly for its lift truck line, supplying the friction and actuating components as one built-up unit. At roughly 16.5 pounds it is a substantial assembly sized to absorb repeated stops without fading. On the truck it brings the drive to a controlled stop and holds the machine once parked, so a brake that stops long or holds weakly signals worn friction material.
Raymond catalogs this brake assembly for its lift truck line, supplying the friction and actuating components as one built up unit that installs in place of a worn original. It measures about 7.3 inches in its longest dimension with a footprint near 2.15 by 2.2 inches, and at roughly 16.5 pounds it is a substantial assembly sized to absorb repeated stops on a working truck without fading.
On a Raymond machine the brake brings the drive to a controlled stop and holds the truck once it is parked, doing that job every duty cycle whether the truck runs loaded or empty. The friction surfaces carry the wear, so a brake that stops long, grabs unevenly, or holds weakly on a grade is signaling that its friction material has worn down. Fitting a fresh Raymond assembly restores full stopping and holding force to the trucks it was cataloged for. Because the parts arrive matched and set as one unit, the repair is a direct replacement of the worn brake, and the friction faces and mounting should line up to the Raymond unit coming off the truck.
| Type | Brake Assembly |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 16.50 |
| Length (in) | 2.15 |
| Width (in) | 2.20 |
| Height (in) | 7.3 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1023442 |
|---|---|
| Product ID | 12235 |
| Short Link | https://forkliftsetc.net/?p=12235 |
| Part Number |
|---|
| RA1023442 |
| SY34895 |
