$74.55
Carrying combined radial and thrust loads, this Raymond bearing cone is the inner half of a tapered roller bearing, the race and roller set that presses onto the shaft and runs against a matching cup. It handles the side loads found in wheel ends, steer axles, and pivot points on lift trucks, and is replaced as a set with its cup.
The cone is the inner half of a tapered roller bearing, the race and roller set that presses onto the shaft and runs against a matching cup to carry combined radial and thrust loads. This Raymond bearing cone is the wear component that takes the brunt of that load, and it is replaced as a set with its cup rather than mixed with a worn race.
Tapered roller bearings like this handle the side loads found in wheel ends, steer axles, and pivot points on lift trucks, where a worn cone shows up as play, roughness, or noise as the rollers and race lose their finish.
Match the cone to the cup it runs against and to the shaft it presses onto, since a tapered set is machined as a matched pair and a mismatched cone will not seat or preload correctly.
| Type | Bearing-Cone |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1126200-002 |
|---|---|
| Product ID | 14128 |
| Short Link | https://forkliftsetc.net/?p=14128 |
| Part Number |
|---|
| 800174776 |
| NN4T-2582 |
| RA1126200-002 |
| RA1126200/002 |
| SY126219 |
| TM2582 |
| TM2582-20024 |
