$3.56
Lining a bore to carry a shaft, pin, or pivot on a replaceable wear surface, this chassis bushing takes the friction and load that would otherwise wear the housing itself. It is the sacrificial bearing surface in its joint, wearing on the inside diameter until play, noise, or misalignment sets in, and a fresh bushing restores the original fit and clearance without machining.
Bushings line a bore to carry a shaft, pin, or pivot on a replaceable wear surface, taking the friction and load that would otherwise wear the housing itself. This chassis bushing is the sacrificial bearing surface in its joint; it wears on the inside diameter over time until the joint develops play, noise, or misalignment.
Replacing the bushing restores the original fit and clearance without machining the surrounding part. Because a bushing is defined by its inside diameter, outside diameter, and length, measure the shaft it rides and the bore it presses into and match all three, since bushings that share one dimension can differ in the others.
| Type | Bushing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | BS-1311 |
|---|---|
| Product ID | 14118 |
| Short Link | https://forkliftsetc.net/?p=14118 |
| Part Number |
|---|
| 005913616081 |
| 005915517681 |
| 220019308 |
| 3121170 |
| 800076046 |
| BG018-001 |
| BS-1311 |
| CL7001464 |
| CR-065117-003 |
| CR065117-003 |
| CR065117-3 |
| CR065117003 |
| CR65117-003 |
| CR65117-3 |
| CR65117003 |
| CR651173 |
| CRCR065117-3 |
| CTA0000-10127 |
| CTA000010127 |
| DWCR65117-3 |
| ET24157 |
| HPBG018-001 |
| HY3121170 |
| LP1430-9027 |
| MBA0000-10127 |
| MBA000010127 |
| SY34813 |
| TY00591-36160-81 |
| TY00591-55176-81 |
| YT220019308 |
| YT800076046 |
