$9.42
This bushing provides a replaceable wear surface at a pivot or mounting point, carrying the friction between a shaft, pin, or linkage and its bore so the surrounding parts do not wear against each other directly. It presses into its bore and is renewed when the joint loosens and develops play, restoring the close fit the assembly needs to locate parts under load.
This bushing provides a replaceable wear surface at a pivot or mounting point, carrying the friction between a shaft, pin, or linkage and its bore so the surrounding parts do not wear against each other directly. It presses into its bore and is renewed when the joint loosens and develops play, restoring the close fit the assembly needs to locate parts under load.
A bushing is a low-cost part protecting a costlier component, which is why it is treated as a routine service item rather than run to failure. Match the inner diameter, outer diameter, and length to the bushing being replaced, since a press-fit bushing has to seat tightly and carry the correct shaft size.
| Type | Bushing, Htx |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | BS-1332 |
|---|---|
| Product ID | 14006 |
| Short Link | https://forkliftsetc.net/?p=14006 |
| Part Number |
|---|
| 005914406481 |
| 220044609 |
| 3144609 |
| 800076047 |
| BS-1332 |
| BS-1332A |
| CR-065117-004 |
| CR065117-004 |
| CR065117-4 |
| CR65117-004 |
| CR65117-4 |
| CR651174 |
| CRCR065117-4 |
| DWCR65117-4 |
| LP1431-4004 |
| TY00591-44064-81 |
| YT220044609 |
