$7.30
Carrying the load and absorbing the wear at a pivot or sliding joint, this Hyster bushing is the sleeve that spares the shaft and housing it rides between. It replaces one that has worn oversize, where the joint starts to show the play, noise, or misalignment that spreads wear to the surrounding parts. Bushings like it sit at loaded pivots and linkages across a lift truck.
A bushing carries the load and absorbs the wear at a pivot or sliding joint, a sleeve that spares the shaft and housing it rides between from wearing on each other. This Hyster bushing replaces one that has worn oversize, where the joint starts to show play, noise, or misalignment that spreads wear to the surrounding parts.
Bushings sit at loaded pivots and linkages across a lift truck, and renewing a worn one brings the joint back to the close fit it was built with. Match the inside diameter, outside diameter, and length to the bushing coming off, since it has to press into its bore and fit its shaft to carry the load.
| Type | Bushing |
|---|---|
| Weight (lbs) | 0.10 |
| Length (in) | 0.10 |
| Width (in) | 0.15 |
| Height (in) | 1.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HY1600345 |
|---|---|
| Product ID | 14157 |
| Short Link | https://forkliftsetc.net/?p=14157 |
| Part Number |
|---|
| HY1600345 |
