$2.51
Raymond chassis bushing, a sleeve that lines a bore to provide a smooth bearing surface for a shaft or pin and to absorb the wear that would fall on the housing. It takes the friction in a pivot or mount so it can be replaced cheaply as it wears, rather than reworking the surrounding part. A worn bushing is a common cause of play in a pivot or linkage.
A bushing for a Raymond lift truck chassis, a sleeve that lines a bore to provide a smooth bearing surface for a shaft or pin and to absorb wear that would otherwise fall on the housing. A bushing takes the friction in a pivot or mount so it can be replaced cheaply as it wears, rather than requiring the surrounding part to be reworked.
Carried under Raymond's part reference, it presses into its original bore as a direct replacement. When a pivot or linkage develops play, a worn bushing is a common cause, and fitting the correct replacement restores the proper fit. Confirm the bore and shaft size against the bushing being replaced.
| Type | Bushing |
|---|---|
| Weight (lbs) | 0.15 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA460-014 |
|---|---|
| Product ID | 11904 |
| Short Link | https://forkliftsetc.net/?p=11904 |
| Part Number |
|---|
| 220020166 |
| 220026052 |
| 3038465 |
| 3134538 |
| 800018981 |
| 800040122 |
| BR-1413 |
| BS-1457 |
| BS-1496 |
| CR065038-009 |
| CR065038-9 |
| CR065038009 |
| CR65038-009 |
| CR65038-9 |
| CR650389 |
| ET241290 |
| HY3038465 |
| HY3134538 |
| LP1431-4111 |
| LP1432-1018 |
| RA460-014 |
| RA460014 |
| RADS224781 |
| SY43383 |
| YT220020166 |
| YT220026052 |
