$1.59
Set into a pivot bore as the replaceable wear surface between a shaft and its housing, this Raymond bushing takes the friction of a moving joint so the shaft and housing do not wear against each other. Pressed into place, it carries load and motion at a pivot or slide point, holding the joint tight while letting the shaft turn or move freely, and renews a loosened joint cheaply.
Set into a pivot bore as the replaceable wear surface between a shaft and its housing, this Raymond bushing takes the friction of a moving joint so the shaft and housing do not wear against each other. Pressed into place, it carries load and motion at a pivot or slide point, holding the joint tight while letting the shaft turn or move freely.
Bushings are built to wear in place of the more expensive parts around them, so a joint that has loosened is usually restored by replacing the bushing rather than the components it protects. As it wears the joint develops play that shows up as looseness or noise in the mechanism.
Confirm the inner diameter, outer diameter, and length against the bushing being removed, since a press-fit bushing must match both the shaft and the bore to seat and carry load correctly.
| Type | Bushing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA460-102 |
|---|---|
| Product ID | 15358 |
| Short Link | https://forkliftsetc.net/?p=15358 |
| Part Number |
|---|
| RA460-102 |
