$12.61
Every pivot point needs a surface that can take repeated motion without chewing up the parts around it, and this Crown bushing is that surface. It lines the bore so the shaft turns smoothly and the wear stays on the sleeve, protecting Crown lift truck components through long service.
Every pivot point needs a surface that can take repeated motion without chewing up the parts around it. A bushing is that surface, lining the bore so the shaft turns smoothly and wear stays on the sleeve. A Crown bushing used on Crown lift trucks. Match the bore, outer diameter, and length to the bushing being replaced.
| Type | Bushing |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR145822-050 |
| Weight (lbs) | 0.05 |
| Length (in) | 2.90 |
| Width (in) | 2.60 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR145822-050 |
|---|---|
| Product ID | 15250 |
| Short Link | https://forkliftsetc.net/?p=15250 |
| OEM Number | CR145822-050 |
| Part Number |
|---|
| TSA-3014086 |
| TSA-800019860 |
| TSA-CR084882-001 |
| TSA-CR084882-1 |
| TSA-CR145822-050 |
| TSA-CR84882-001 |
| TSA-CR84882-1 |
| TSA-CR848821 |
| TSA-HY3014086 |
