$25.31
Supporting a rotating or pivoting shaft on the left side of its assembly, this Raymond left hand bearing carries the load while letting the shaft turn with minimal friction. The left hand designation marks it as the mirror of its right hand counterpart, handed to its position and not interchangeable side to side.
This Raymond left hand bearing supports a rotating or pivoting shaft on the left side of the assembly it was built for, carrying the load while letting the shaft turn with minimal friction. The left hand designation marks it as the mirror of its right hand counterpart, so the two are handed to their positions and are not interchangeable side to side.
As a Raymond part, it is sized to the bore, shaft, and housing of the location it seats in. A bearing in this service wears through its bearing surface over time, developing play or roughness that shows up as noise or slop in the assembly, which is the signal to replace it.
Match the bore and outer dimensions and confirm the left hand orientation against the bearing coming out, since a handed bearing installed on the wrong side will not seat or run correctly.
| Type | LH Bearing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1043283 |
|---|---|
| Product ID | 13829 |
| Short Link | https://forkliftsetc.net/?p=13829 |
| Part Number |
|---|
| RA1043283 |
