$36.11
This sleeve works as a wear liner inside a Raymond lift truck linkage, carrying the pivot load between a pin and its bore. It takes the friction of repeated lift cycles so the surrounding linkage stays true and free of slop. When a pivot begins to feel loose or noisy, a fresh sleeve brings the fit back to specification and extends the life of the mating parts.
Taking the friction of repeated lift cycles as a wear liner inside a Raymond lift truck linkage, this sleeve carries the pivot load between a pin and its bore so the surrounding linkage stays true. It is the sacrificial surface in the joint, wearing in place of the more expensive pin and bore and absorbing the rubbing so those parts keep their fit.
As the sleeve wears, the pivot begins to feel loose and sound noisy, and slop develops in the linkage that throws off the geometry it controls. A new sleeve brings the joint back to specification and extends the life of the mating pin and bore, which is why it is replaced during a pivot rebuild rather than after the harder parts are damaged.
Match the sleeve's inside diameter, outside diameter, and length to the pin and bore in the Raymond lift linkage it serves, since a sleeve off on any dimension will not carry the pivot load correctly.
| SKU | RA1050089/003 |
|---|---|
| Product ID | 11879 |
| Category | Bushings, Lift Linkage |
| Brand | Raymond |
| Weight | 1.15 lbs |
| Dimensions | 1.1" L × 1.1" W × 1.25" H |
| Type | Sleeve |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1050089/003 |
|---|---|
| Product ID | 11879 |
| Short Link | https://forkliftsetc.net/?p=11879 |
| Part Number |
|---|
| 800140757 |
| RA1050089-003 |
| RA1050089/003 |
