$6.55
Guiding the load carriage as it travels the mast rails, this Raymond track bearing keeps the carriage aligned and rolling smoothly under load so the forks raise and lower without binding or wandering. Worn track bearings let the carriage develop side play and drag, which roughens lifting and accelerates rail wear. Sized to fit Raymond mast configurations.
Track and carriage bearings guide the load carriage as it travels up and down the mast rails, and this Raymond component rides in that path to keep the carriage aligned and rolling smoothly under load. A carriage running on worn track bearings develops side play and drag, which makes lifting rougher, accelerates rail wear, and puts uneven load on the lift chains.
Replacing the bearing restores the tight, guided travel the mast is built around, so the forks raise and lower without binding or wandering. Bearings in this role take continuous rolling load through every lift cycle, so surface wear and flat spots are the normal end-of-life signal.
Match the bearing outside diameter and mounting to the carriage it serves, since track bearing sizes vary across Raymond mast configurations.
| Type | Track Bearing Carriage |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1022278 |
|---|---|
| Product ID | 14992 |
| Short Link | https://forkliftsetc.net/?p=14992 |
| Part Number |
|---|
| RA1022278 |
| SY1222147 |
| SY89148 |
| TY00590-48662-71 |
| TY005904866271 |
