$6.59
This Crown rod is manufactured for Crown equipment as a replacement for the rod in its original assembly. Measuring 2.3 inches long, 0.1 inches wide, and 2.2 inches high, it is a small component identified by its dimensions against the part it replaces on the truck.
Built for Crown lift trucks, this Crown rod serves as a rigid link in a chassis or control assembly, transmitting motion or holding two points in fixed relation as the mechanism around it operates. A rod in this role carries push-pull, tension, or compression load along its length, so straightness and true, unworn ends are what keep the linkage tight and free of lost motion.
At roughly 2.3 inches long and 2.2 inches tall, it is a compact, slender component sized to the Crown assembly it was cataloged for. A rod is replaced when it bends, when its ends wear and let play into the linkage, or when corrosion pits the surface it bears against.
Fitting the correct Crown rod restores the original geometry of the assembly, so the mechanism returns to its designed travel and clearance.
| Type | Rod |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR089298-001 |
| Weight (lbs) | 0.01 |
| Length (in) | 2.30 |
| Width (in) | 0.10 |
| Height (in) | 2.2 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR89298-001 |
|---|---|
| Product ID | 13958 |
| Short Link | https://forkliftsetc.net/?p=13958 |
| OEM Number | CR089298-001 |
| Part Number |
|---|
| 220019459 |
| 3123752 |
| 800020226 |
| CR089298-001 |
| CR089298-1 |
| CR89298-001 |
| CR89298-1 |
| CR892981 |
| HY3123752 |
| SY99-00444 |
| YT220019459 |
| TSA-220019459 |
| TSA-3123752 |
| TSA-800020226 |
| TSA-CR089298-001 |
| TSA-CR089298-1 |
| TSA-CR89298-001 |
| TSA-CR89298-1 |
| TSA-CR892981 |
| TSA-HY3123752 |
| TSA-SY99-00444 |
| TSA-YT220019459 |
