$2,414.50
This drive unit transmits power from the electric drive motor to the wheel on Crown lift trucks, combining the gear reduction and wheel-end housing into one serviceable assembly. It carries the drive gearing that turns motor rotation into the torque and speed needed to move the truck under load, replacing the internal gear train, bearings, and housing as a complete part rather than rebuilding those components individually.
Transmits power from the electric drive motor to the wheel on Crown lift trucks, combining the gear reduction and wheel-end housing into one serviceable drive unit. Crown sources this assembly through Kordel, and it carries the drive gearing that turns motor rotation into the torque and speed needed to move the truck under load. As a complete unit it replaces the internal gear train, bearings, and housing in a single part rather than rebuilding those components individually. The unit sees continuous load during travel, so worn gears and bearings show up as noise, play, or drivetrain vibration. Match the unit by its housing configuration, mounting interface, and output shaft or wheel mounting arrangement against the drive unit on your Crown truck.
| SKU | CR163272R |
|---|---|
| Product ID | 15046 |
| Category | Chassis, Drive Axles |
| Brand | Crown |
| Weight | 8 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Drive Unit |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 80.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR163272R |
|---|---|
| Product ID | 15046 |
| Short Link | https://forkliftsetc.net/?p=15046 |
| Part Number |
|---|
| CR163272R |
