$205.00
Setting the working length of a linkage, this Raymond adjustment rod holds the dimension it is set to between the two points it connects so a control or mechanism can be brought into correct alignment. When it is bent, seized, or worn at its ends, the mechanism can no longer be adjusted to spec. Fit depends on the rod length and its end fittings.
An adjustment rod sets the working length of a linkage so a control or mechanism can be brought into correct alignment, holding the dimension it is set to between the two points it connects. This Raymond adjustment rod is the replacement member for the linkage it belongs to, the part that establishes and holds the adjusted setting through service.
When an adjustment rod is bent, seized, or worn at its ends, the mechanism it sets can no longer be brought into spec, which shows up as travel or alignment that will not adjust correctly. Fit depends on the rod's length and its end fittings, so match those to the rod being replaced. Supplied as a single rod for service of the assembly it was cataloged for.
| Type | Adjustment Rod |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1089075 |
|---|---|
| Product ID | 15292 |
| Short Link | https://forkliftsetc.net/?p=15292 |
| Part Number |
|---|
| RA1089075 |
