$174.45
This axle is manufactured by Raymond for its electric lift trucks. It carries the wheel bearings and supports the truck's load through the running gear, holding the wheel in fixed alignment as the truck travels and turns. It is sized with defined bearing seats and a mounting bore for its position on the Raymond truck.
Raymond machines this axle to carry the wheel bearings and support the truck's load through the running gear, holding the wheel in fixed alignment as the truck travels and turns. As a load-bearing steel shaft, it locates the wheel and takes the cornering and rolling loads the running gear transmits.
An axle wears at its bearing seats and mounting bores, where lost clearance lets the wheel develop play and drift out of alignment, showing up as uneven tire wear, noise, or wander. A correct replacement restores tight bearing seats and true wheel alignment.
Match the overall length, the bearing seats, and the mounting bore against the original axle, since those dimensions decide whether the bearings and wheel locate the same way.
| Type | Axle |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 5.60 |
| Length (in) | 1.60 |
| Width (in) | 9.90 |
| Height (in) | 11.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA223-001-609 |
|---|---|
| Product ID | 14448 |
| Short Link | https://forkliftsetc.net/?p=14448 |
| Part Number |
|---|
| RA223-001-609 |
