$8.84
This machined square-section axle is produced by Crown for its lift trucks. The square cross-sectional profile lets the shaft seat into a matching square bore or keyed mount so it holds position without rotating, which suits it to fixed pivot and mounting duty where a round shaft would spin. It serves as a load-bearing steel axle within its assembly.
A square cross-section sets this axle apart from a round shaft: the flat-sided profile seats into a matching square bore or keyed mount so the axle holds position without rotating, which suits it to fixed pivot and mounting duty where a round shaft would spin. Crown machines it from steel to carry load through the assembly it anchors.
An axle in this duty wears at its bearing seats and mounting faces, developing play that loosens the parts it locates and can let the mount work against the square bore, the point at which a fresh axle restores a tight, non-rotating fit.
Match the square cross-section width and the overall length against the shaft coming off, since those dimensions decide whether it seats in the same square bore or keyed mount.
| Type | Axle Square |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.10 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR811937 |
|---|---|
| Product ID | 14431 |
| Short Link | https://forkliftsetc.net/?p=14431 |
| Part Number |
|---|
| CR811937 |
| SY99-02480 |
| TSA-CR811937 |
| TSA-SY99-02480 |
