$12.94
Positioning the lift limit switch on the mast so it trips at exactly the designed point, this bracket holds the switch fixed against the vibration and repeated contact of daily lift cycles. When it bends, cracks, or corrodes, the switch drifts out of alignment and the mast stops short of or past where it should, so a sound mount brings the lift limit back to its intended trip point.
Positioning the lift limit switch on the mast so it trips at exactly the designed point, this bracket holds the switch fixed against the vibration and repeated contact of daily lift cycles. When the bracket bends, cracks, or corrodes, the switch drifts out of alignment and the mast stops short of or past where it should, so restoring the correct mount brings the lift limit back to its intended trip point. It is a fabricated structural part rather than a wear item, typically replaced during a limit switch service or a mast repair when the original mount is damaged or missing. Match the bolt pattern and the switch mounting on the bracket being removed, since a lift limit bracket is built around the specific mast and switch style it serves and those features vary.
| Type | Bracket Lift Limit |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA313183-001 |
|---|---|
| Product ID | 15442 |
| Short Link | https://forkliftsetc.net/?p=15442 |
| Part Number |
|---|
| BT313183-001 |
| RA313183-001 |
