$186.52
This electronic control card governs hydraulic functions on Crown lift trucks. The printed circuit assembly processes operator inputs and switches the hydraulic outputs that drive lift, lower, and auxiliary movement, seating into the truck's control system as a serviceable module. Crown builds it as a model-specific board with a connector layout and circuit configuration matched to its trucks.
Operator inputs for lift, lower, and auxiliary hydraulic movement are read and switched by this Crown hydraulic control card, a printed circuit assembly that seats into the truck's control system as a serviceable module. It translates the commands from the operator's controls into the switched outputs that drive the hydraulic functions, acting as the electronic link between the levers and the valves.
Crown builds the board as a model-specific assembly, so its connector layout and circuit configuration are matched to a defined range of Crown trucks rather than shared across the whole line. A card that has failed typically shows up as hydraulic functions that respond erratically, partially, or not at all, since the board is what commands them.
Because the board is application-specific, match the card outline, the connector positions, and the Crown identifier printed on the board you are replacing, since two cards can share an outline yet differ in circuitry and pinout.
| Type | Card, Hydraulic |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.05 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR812942-001 |
|---|---|
| Product ID | 14388 |
| Short Link | https://forkliftsetc.net/?p=14388 |
| Part Number |
|---|
| CR812942-001 |
