$45.95
Raymond builds this carriage shaft as a load-bearing pin within the load carriage, giving rollers, links, or bearings a hardened surface to turn on as the carriage rides the mast. Once the original scores, bends, or wears undersize, the parts riding on it begin to loosen and knock. This replacement restores the original bearing surface and fit.
Raymond builds this carriage shaft as a load-bearing pin inside the load carriage, giving the rollers, links, or bearings that ride on it a hardened surface to turn against as the carriage travels up and down the mast. Under a loaded carriage the shaft carries both the weight and the repeated motion of every lift cycle, so it is ground and hardened to hold its diameter against that duty.
Once a shaft in this service scores, bends, or wears undersize, the components riding on it gain clearance and begin to loosen, knock, and wear faster themselves. This replacement restores the original bearing surface and the tight fit the carriage parts were set to. Match the shaft diameter and overall length to the one being removed, since a carriage shaft off on either dimension will not locate or properly support the components it carries.
| Type | Carriage Shaft |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1010121-002 |
|---|---|
| Product ID | 15040 |
| Short Link | https://forkliftsetc.net/?p=15040 |
| Part Number |
|---|
| RA1010121-002 |
| RA1010121/002 |
| SY99-01105 |
| TY00590-48650-71 |
| TY005904865071 |
