$2.97
This Raymond clamp holds a line, cable, or mounted part in a fixed position against the truck structure so it does not shift, chafe, or vibrate loose during operation. Clamps like this secure hydraulic hoses, wiring, or hardware at defined points along the frame, mast, or power unit. It fits Raymond electric lift trucks.
Holding a line, cable, or mounted part in a fixed position against the vehicle structure, this clamp keeps the item it retains from shifting, chafing, or vibrating loose while a lift truck works. Clamps like it secure hydraulic hoses, wiring harnesses, and hardware at defined anchor points along a frame, mast, or power unit, where an unsecured line would rub through or fatigue.
It is a routine service item, replaced when the clamp cracks, loses its grip, or was cut away for access during another repair and needs to go back to keep the run supported.
Match the clamp to the outside diameter of the item it holds and to the mounting hole pattern where it bolts down, since a clamp that is too large will not grip and one that is too small will not close over the line.
| Type | Cl Amp |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA811-931 |
|---|---|
| Product ID | 11238 |
| Short Link | https://forkliftsetc.net/?p=11238 |
| Part Number |
|---|
| RA811-931 |
