$3.47
Routing grease into a bearing or pivot on Crown lift trucks is this lubrication fitting's job, with its shank set at a 65 degree angle to reach a service point a straight fitting cannot. A check valve holds the charge once the gun pulls away, keeping the joint greased where access is tight.
Routes grease into a bearing or pivot on Crown lift trucks with the shank set at a 65 degree angle, reaching a service point a straight fitting cannot. A check valve holds the charge once the gun pulls away. Match the thread size to the fitting coming out, keeping the 65 degree angle.
| Type | Grease fitting |
|---|---|
| Equipment | Crown lift trucks |
| Angle | 65 degrees |
| Manufacturer Part Number | CR064300 |
| Weight (lbs) | 0.02 |
| Length (in) | 0.08 |
| Width (in) | 0.03 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR64300 |
|---|---|
| Product ID | 14784 |
| Short Link | https://forkliftsetc.net/?p=14784 |
| OEM Number | CR064300 |
| Part Number |
|---|
| 800127352 |
| CR064300 |
| CR64300 |
| SY73288 |
| TSA-800127352 |
| TSA-CR064300 |
| TSA-CR64300 |
| TSA-SY73288 |
