$19.77
This steel collar is manufactured by Crown for its lift trucks. A collar rides on a shaft or rod to locate a component, set spacing, or retain another part against axial movement within the assembly it serves. It installs as a direct Crown component on Crown equipment, built to a defined bore, outside diameter, and width for its position.
Riding on a shaft or rod, this steel collar locates a component, sets spacing, or retains another part against axial movement within the assembly it serves. Crown machines it to hold its position on the shaft so the part it backs up cannot creep under load or vibration.
A collar is replaced when its bore wears oversize, its clamping or set feature no longer holds, or it has been damaged during service, since a collar that slips lets the part it positions drift out of place. Installing the Crown collar restores the original spacing and hold.
Match the replacement by the bore diameter, outside diameter, and width of the collar coming off your truck, along with how it clamps or keys to the shaft, since those govern whether it seats at the right spot and grips the shaft correctly.
| Type | Collar |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR081161-020 |
| Weight (lbs) | 0.06 |
| Length (in) | 3.00 |
| Width (in) | 2.90 |
| Height (in) | 0.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR81161-020 |
|---|---|
| Product ID | 15288 |
| Short Link | https://forkliftsetc.net/?p=15288 |
| OEM Number | CR081161-020 |
| Part Number |
|---|
| 800019676 |
| CR081161-020 |
| CR081161-20 |
| CR81161-020 |
| CR81161-20 |
| CRCR81161020 |
| TSA-800019676 |
| TSA-CR081161-020 |
| TSA-CR081161-20 |
| TSA-CR81161-020 |
| TSA-CR81161-20 |
| TSA-CRCR81161020 |
