$2.57
This machined Crown collar locks onto a shaft or axle to fix its axial position on Crown lift trucks. It seats against an adjacent bearing, bushing, or hub and keeps a rotating or sliding member from creeping under working load. The clamp or set-screw arrangement holds it firmly in place through operation.
Machined to clamp onto a shaft or an axle, this Crown collar fixes the axial position of the shaft it rides on, seating against an adjacent bearing, bushing, or hub to set a hard stop. Once locked in place, it keeps a rotating or sliding member from creeping along the shaft under working load.
Crown catalogs it as a replacement for its lift trucks, where a collar is renewed when its bore wears, its clamp loses grip, or its set screw strips and it can no longer hold position. Match the inside bore diameter to the shaft it retains, and match the clamp or set-screw arrangement to how the original locked on, since the bore sets the fit and the clamp style sets the hold.
| Type | Collar |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR088611-002 |
| Weight (lbs) | 0.15 |
| Length (in) | 0.20 |
| Width (in) | 0.15 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | E-7252 |
|---|---|
| Product ID | 14817 |
| Short Link | https://forkliftsetc.net/?p=14817 |
| OEM Number | CR088611-002 |
| Part Number |
|---|
| 220021931 |
| 3126965 |
| 800020187 |
| CR088611-002 |
| CR088611-2 |
| CR88611-002 |
| CR88611-2 |
| E-7252 |
| LP450-1034 |
| SY83243 |
| YT220021931 |
