$1.89
At 0.031 inches thick, this Crown flat washer spreads the clamping load of a bolt or nut across a wider area, protecting the surface beneath and helping the fastener hold its torque. Crown specifies it as an original component on its lift trucks, where a thin, consistent washer keeps a joint seated without adding stack height.
At 0.031 inches thick, this Crown flat washer spreads the clamping load of a bolt or nut across a wider area, protecting the surface underneath and helping the fastener hold its torque. Crown specifies it as an original component on its lift trucks, where a thin, consistent washer keeps a joint seated without adding stack height. Match the inside diameter to the fastener it rides on, since flat washers of the same thickness are made for several bolt sizes.
| Type | Flat washer |
|---|---|
| Equipment | Crown |
| Thickness | 0.8 mm (0.031 in) |
| Manufacturer Part Number | CR060030-317 |
| Weight (lbs) | 0.03 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR60030-317 |
|---|---|
| Product ID | 15539 |
| Short Link | https://forkliftsetc.net/?p=15539 |
| OEM Number | CR060030-317 |
| Part Number |
|---|
| 800018421 |
| CR-060030-317 |
| CR060030-317 |
| CR060030317 |
| CR60030-317 |
| SY99-00265 |
| SY9900265 |
| TSA-800018421 |
| TSA-CR-060030-317 |
| TSA-CR060030-317 |
| TSA-CR060030317 |
| TSA-CR60030-317 |
| TSA-SY99-00265 |
| TSA-SY9900265 |
