$4.47
At 3 mm thick, roughly 0.125 inch, this Crown flat washer spreads a fastener's clamping load across a wider area, protecting the mounting surface and giving the bolt or nut a flat, even bearing face. Flat washers of this kind keep fastener heads from digging into softer material and help hold a joint tight on Crown equipment.
At 3 mm thick, roughly 0.125 inch, this Crown flat washer spreads a fastener's clamping load across a wider area, protecting the mounting surface and giving the bolt or nut a flat, even bearing face. Flat washers of this kind keep fastener heads from digging into softer material and help hold a joint tight on Crown equipment. Match the washer's bore to the fastener diameter it seats on, since the hole size determines which bolt it fits.
| Type | Flat washer |
|---|---|
| Equipment | Crown |
| Thickness | 3 mm (0.125 in) |
| Manufacturer Part Number | CR060030-278 |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-1163 |
|---|---|
| Product ID | 12429 |
| Short Link | https://forkliftsetc.net/?p=12429 |
| OEM Number | CR060030-278 |
| Part Number |
|---|
| 005917395381 |
| 220015288 |
| 3032892 |
| 800018410 |
| CR-060030-278 |
| CR060030--278 |
| CR060030-278 |
| CR60030-278 |
| ET22852 |
| HW-1163 |
| HY3032892 |
| LP1069-1094 |
| TY00591-73953-81 |
| YT220015288 |
