$7.65
Made by Crown and measuring 4.1 millimeters, roughly 0.16 inches, thick, this flat washer distributes a fastener's clamping force over a broader footprint, protecting the mounting surface and helping the joint hold torque under load and vibration. The heavier thickness suits it to higher-load joints where a thinner washer would dish or cut into the surface.
Made by Crown at 4.1 millimeters, roughly 0.16 inches, thick, this flat washer distributes a fastener's clamping force over a broader footprint, protecting the mounting surface and helping the joint hold torque under load and vibration. The heavier thickness suits it to higher-load joints where a thin washer would dish or cut in. Match the inside diameter to the bolt it rides on, since washers of the same thickness are produced for several fastener sizes.
| Type | Washer Flat.16, 4.1 mm |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.44 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR060030-315 |
|---|---|
| Product ID | 12472 |
| Short Link | https://forkliftsetc.net/?p=12472 |
| Part Number |
|---|
| 800018419 |
| CR-060030-315 |
| CR060030-315 |
| CR060030315 |
| CR60030-315 |
| HM060030-315 |
| SYCR60030315 |
