$7.65
Crown flat washer sized to lift truck hardware at 4.1 millimeter thickness, spreading the clamping load of a bolt or nut across a wider area to protect the surface underneath and keep the fastener from digging in or pulling through. The correct thickness sets the proper standoff and load distribution, matching the original Crown assembly in bore, outside diameter, and thickness.
Sized to Crown lift truck hardware at a 4.1 millimeter thickness, this flat washer spreads the clamping load of a bolt or nut across a wider area, protecting the surface underneath and keeping the fastener from digging in or pulling through. Crown specifies it as the correct washer for the assemblies it was cataloged into, so it matches the original in bore, outside diameter, and thickness.
A flat washer of the right thickness also sets the correct standoff and load distribution in a bolted stack, which is why matching the 4.1 millimeter dimension rather than substituting a thinner or thicker washer keeps the joint clamping as designed.
| Type | Flat washer |
|---|---|
| Equipment | Crown |
| Thickness | 4.1 mm (0.16 in) |
| Manufacturer Part Number | CR060030-315 |
| Weight (lbs) | 0.45 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR60030-315 |
|---|---|
| Product ID | 14573 |
| Short Link | https://forkliftsetc.net/?p=14573 |
| OEM Number | CR060030-315 |
| Part Number |
|---|
| 800018419 |
| CR-060030-315 |
| CR060030-315 |
| CR060030315 |
| CR60030-315 |
| HM060030-315 |
| SYCR60030315 |
| TSA-800018419 |
| TSA-CR-060030-315 |
| TSA-CR060030-315 |
| TSA-CR060030315 |
| TSA-CR60030-315 |
| TSA-HM060030-315 |
| TSA-SYCR60030315 |
