$0.75
Crown builds this roll pin to lock into a drilled hole by its own spring tension, holding a shaft, gear, or linkage joint in position without threads or a separate fastener. It seats and grips the bore on its own, and it is common maintenance hardware across Crown lift trucks where a connection has to stay secure.
Locking into a drilled hole by its own spring tension, this Crown roll pin holds a shaft, gear, or linkage joint in position without threads or a separate fastener. It is common maintenance hardware across Crown lift trucks. Match the pin diameter and length to the one backing out of the bore so the new pin grips the same way.
| Type | Roll pin |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR060000-043 |
| Weight (lbs) | 0.10 |
| Length (in) | 1.00 |
| Width (in) | 0.50 |
| Height (in) | 1.4 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | E-5822 |
|---|---|
| Product ID | 14483 |
| Short Link | https://forkliftsetc.net/?p=14483 |
| OEM Number | CR060000-043 |
| Part Number |
|---|
| 800128433 |
| CR-060000-043 |
| CR060000-043 |
| CR060000-43 |
| CR60000-043 |
| CR60000-43 |
| E-5822 |
| ET22604 |
| HY0019938 |
| HY19938 |
| LP757-1076 |
