$1.84
Crown builds this spacer for its lift trucks, where it seats between two parts to set a fixed clearance and keep the assembly square. The length holds that gap, positioning the surrounding hardware so the stack seats and loads the way it should through service and use on the Crown truck under working conditions.
Crown builds this spacer for its lift trucks, where it seats between two parts to set a fixed clearance and keep the assembly square. The length holds that gap. When choosing a replacement, match the inner diameter, outer diameter, and length to the spacer coming off, since the length determines the standoff it holds.
| Type | Spacer |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR062488-004 |
| Weight (lbs) | 0.02 |
| Length (in) | 0.05 |
| Width (in) | 0.03 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR62488-004 |
|---|---|
| Product ID | 14518 |
| Short Link | https://forkliftsetc.net/?p=14518 |
| OEM Number | CR062488-004 |
| Part Number |
|---|
| 800018637 |
| CR062488-004 |
| CR062488-4 |
| CR62488-004 |
| CR62488-4 |
| CR624884 |
| SY92095 |
| SY99-00870 |
| TSA-800018637 |
| TSA-CR062488-004 |
| TSA-CR062488-4 |
| TSA-CR62488-004 |
| TSA-CR62488-4 |
| TSA-CR624884 |
| TSA-SY92095 |
| TSA-SY99-00870 |
