$10.64
Crown spacer for chassis and hardware assembly on Crown lift trucks, setting and holding a fixed distance between two components so the correct gap or alignment is maintained as the joint is torqued. As commodity hardware it replaces the spacer in its original position, restoring proper spacing in the assembly it was built for.
A Crown spacer used in chassis and hardware assembly on Crown lift trucks, carried under Crown's own part reference. A spacer sets and holds a fixed distance between two components in an assembly, maintaining the correct gap or alignment as the joint is torqued.
As commodity hardware, it replaces the spacer in its original position. Match it against the spacer being removed to confirm the size before installing.
| Type | Spacer |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR103418-031 |
| Weight (lbs) | 0.04 |
| Length (in) | 1.06 |
| Width (in) | 1.05 |
| Height (in) | 0.4 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR103418-031 |
|---|---|
| Product ID | 11959 |
| Short Link | https://forkliftsetc.net/?p=11959 |
| OEM Number | CR103418-031 |
| Part Number |
|---|
| 220043949 |
| 3143949 |
| 800063724 |
| CR103418-031 |
| CR103418-31 |
| CR103418031 |
| CTA0000-31327 |
| CTA000031327 |
| MBA0000-31327 |
| MBA000031327 |
| SY99-01097 |
| UKA000031327 |
| YT220043949 |
| TSA-220043949 |
| TSA-3143949 |
| TSA-800063724 |
| TSA-CR103418-031 |
| TSA-CR103418-31 |
| TSA-CR103418031 |
| TSA-CTA0000-31327 |
| TSA-CTA000031327 |
| TSA-MBA0000-31327 |
| TSA-MBA000031327 |
| TSA-SY99-01097 |
| TSA-UKA000031327 |
| TSA-YT220043949 |
