$3.17
Crown washer, part CR081519, a hardware component for Crown equipment that seats under a bolt or nut to distribute clamping load and protect the mating surface. As a small fastening component, it helps keep a threaded connection tight and evenly seated across a range of Crown assemblies where a washer is specified.
Sized for Crown lift truck hardware, this washer seats under a bolt head or nut to spread clamping load across a wider area of the mating surface, which protects the material from galling and helps the joint hold its torque. At about 0.2 pounds it is a standard steel flat washer for chassis and component assembly.
Match the bore and outside diameter to the fastener it serves, since a washer that is too large or too small in the bore will not seat correctly against the joint.
| Type | Washer |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR081519 |
| Weight (lbs) | 0.20 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-1982 |
|---|---|
| Product ID | 11119 |
| Short Link | https://forkliftsetc.net/?p=11119 |
| OEM Number | CR081519 |
| Part Number |
|---|
| 005914081081 |
| 005916234281 |
| 005916315181 |
| 220010399 |
| 22205 |
| 3040571 |
| 800019682 |
| BRCK655639 |
| CL7003609 |
| CR081519 |
| CR81519 |
| CT0397166 |
| CT397166 |
| EA81519 |
| ET221481 |
| ET22205 |
| ET22976 |
| HW-1452 |
| HW-1982 |
| HY3040571 |
| LP1069-1098 |
| LP762-1020 |
| MB0397166 |
| MB397166 |
| R-2029 |
| RA812-000-112 |
| SYCR81519 |
| TY00591-40810-81 |
| TY00591-62342-81 |
| TY00591-63151-81 |
| YT220010399 |
