$770.09
The reach mechanism on a Raymond truck extends and retracts on a scissor, or pantograph, linkage, and this inner arm is the number two link that carries the forks out over the load and draws them back. A structural component, it takes the bending and shear of pushing and pulling a load at reach, and its pivot bores and pin bosses are the points that wear.
The reach mechanism on a Raymond truck extends and retracts on a scissor, or pantograph, linkage, and this is the inner arm, the number two link in that pivoting assembly that carries the forks out over the load and draws them back. As a structural Raymond component, it takes the bending and shear of pushing and pulling a load at reach, and its pivot bores and pin bosses are the points that wear.
An arm that is bent, cracked, or worn oval at the pivots lets the reach develop play and misalignment, which shows as a sloppy or binding extend and retract. Match the pivot bore sizes, the arm length, and the pin locations to the arm coming off, since the scissor links are handed and dimensioned to their position in the linkage.
| Type | Inner Scissor Arm #2 |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1020233 |
|---|---|
| Product ID | 13898 |
| Short Link | https://forkliftsetc.net/?p=13898 |
| Part Number |
|---|
| RA1020233 |
