$199.33
This Raymond link is the connecting member in a mechanical linkage, tying two moving parts together so motion or force transmits from one to the other through its pivot points. It carries the loads the linkage imposes and holds its connected parts at a fixed spacing, replacing a link worn at the pivot holes or bent and cracked under load.
The connecting member in a mechanical linkage, this Raymond link ties two moving parts together so motion and force transmit from one to the other through the pivot points at its ends. It carries the loads the linkage imposes and holds its two connected parts at a fixed spacing, which is what fixes the geometry the linkage works through.
A link fails at its pivots or across its body. Wear at the pivot holes opens up clearance and introduces lost motion, so the linkage grows sloppy and imprecise, while an overload can bend or crack the link outright and change the spacing it is supposed to hold. Either failure shows up as slack, misalignment, or binding in whatever mechanism the linkage drives.
Match the hole spacing and the pivot diameters to the link being replaced, since those dimensions set the geometry the linkage depends on to move correctly and cannot be adjusted for after installation.
| Type | Link |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1143029-001 |
|---|---|
| Product ID | 15165 |
| Short Link | https://forkliftsetc.net/?p=15165 |
| Part Number |
|---|
| BT1143029-001 |
| RA1143029-001 |
| RA1143029/001 |
