$218.89
A link ties two components together so motion or load passes from one to the other, and this Raymond part replaces the original where wear at its pivots or bearing points has introduced slop into the connection. As the holes and pins wear, the link develops play that shows up as lost motion or noise in whatever it connects, so a fresh link restores tight travel.
Connecting two components so motion or load transfers from one to the other, this link forms the mechanical tie in a linkage, moving with the mechanism as it cycles. Its pivots or bearing points are the working surfaces, and they are what wear over the life of the part.
As the holes and pins wear, the link develops play, and that lost motion shows up as slop in the connection, imprecise movement, or knocking noise where the linkage should move tightly. A link with worn pivots no longer holds the geometry the mechanism depends on, so replacing it takes the slack back out of the connection.
Match the link by its length between centers, its hole or pin diameters, and its thickness, since those dimensions set both the geometry of the connection and how it mounts. Links that look alike can differ in any of the three and will not restore the original motion if they do.
| Type | Link |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1143029-003 |
|---|---|
| Product ID | 14060 |
| Short Link | https://forkliftsetc.net/?p=14060 |
| Part Number |
|---|
| RA1143029-003 |
| RA1143029/003 |
