$125.75
Built by Raymond as a right-hand connecting member in a mechanical linkage, this link is the handed counterpart to a matching left link, so the pair works as mirror images on opposite sides of the assembly. A link transmits motion or holds alignment between two pivot points, and replacing a bent or elongated one with the correct-handed Raymond part restores the original pivot spacing and fit.
Raymond builds this right-hand link as a connecting member in a mechanical linkage, the handed counterpart to a matching left link, so the pair works as mirror images on opposite sides of the assembly. A link transmits motion or holds alignment between two pivot points, and a bent, worn, or elongated link throws off the geometry it was set to hold.
Replacing it with the correct-handed Raymond link restores the original pivot spacing and fit. Confirm the hand and the pivot-hole spacing against the link being replaced, since the right and left versions are not interchangeable and the hole centers must match the points they connect.
| Type | Link, Right |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA313188-001 |
|---|---|
| Product ID | 14633 |
| Short Link | https://forkliftsetc.net/?p=14633 |
| Part Number |
|---|
| BT313188-001 |
| PM313188-001 |
| RA313188-001 |
| SY99-03684 |
| TY313188-001 |
