$2.39
Once torqued, this Raymond lock nut resists the vibration of a working lift truck and stays put on the bolt. Used in the hardware of Raymond lift trucks, it holds tension in the joint through the shaking and loads of daily service, keeping the fastener from backing off over time.
Once torqued, this Raymond lock nut resists the vibration of a working lift truck and stays put on the bolt. It is used in Raymond lift truck hardware. Match the thread diameter and pitch to the bolt it threads onto, since a nut right in diameter but wrong in pitch will not run on.
| Type | Lock Nut |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.15 |
| Length (in) | 0.80 |
| Width (in) | 0.50 |
| Height (in) | 2.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA5-016-014 |
|---|---|
| Product ID | 12419 |
| Short Link | https://forkliftsetc.net/?p=12419 |
| Part Number |
|---|
| RA5-016-014 |
