$1.05
This Raymond lock washer keeps a bolted joint on Raymond lift trucks from loosening under vibration, sitting under the nut or bolt head where its spring tension or bite holds the fastener against the backing-off that constant vibration would cause. It is replaced with the fastener when a joint is rebuilt, since a compressed washer loses its locking tension.
Seated under a nut or bolt head, this lock washer keeps a bolted joint from loosening under the vibration of daily service. Its spring tension or bite holds the fastener against the steady backing-off that constant vibration works into a joint, maintaining clamp load a flat washer cannot hold on its own.
A lock washer is replaced with the fastener whenever a joint is rebuilt, since a washer that has been compressed loses the spring tension that does its work. A flattened split washer or a dulled toothed washer no longer resists rotation and lets the fastener creep loose. Match the washer type and inside diameter to the fastener it seats on.
| Type | Lock Washer |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.15 |
| Length (in) | 1.10 |
| Width (in) | 0.40 |
| Height (in) | 0.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA0120036CE |
|---|---|
| Product ID | 11047 |
| Short Link | https://forkliftsetc.net/?p=11047 |
| Part Number |
|---|
| RA0120036CE |
