$240.73
The Tennant spray manifold bar for the T16 rider floor scrubber distributes cleaning solution across the full width of the scrub head, feeding solution out along its 33.7 inch length so the brushes get an even wet path in front of them as the machine scrubs. It is replaced when it cracks or its outlets clog and can no longer lay down an even solution pattern.
The Tennant spray manifold bar for the T16 rider floor scrubber measures 33.7 inches and distributes cleaning solution across the full width of the scrub head. Solution feeds out along the length of the bar so the brushes meet an even wet path in front of them as the machine works.
An even solution pattern is what lets the scrub head clean consistently across its whole width rather than in streaks. When the manifold cracks or its outlets clog, it stops laying down that even pattern and leaves dry stripes and patchy scrubbing behind the machine, which is the signal to replace it.
This is the full-width bar for the T16, so match it to the scrub head on the machine being serviced. Forklifts Etc. supplies it as the Tennant T16 spray manifold bar.
| Type | Manifold Bar |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TN1059700 |
|---|---|
| Product ID | 14232 |
| Short Link | https://forkliftsetc.net/?p=14232 |
| Part Number |
|---|
| TN1059700 |
