$1,320.00
This steer control module governs the electric steering system on Crown lift trucks, translating operator steering input into commanded output for the steer circuit. Mounted in the steering control area, it processes the signals that direct wheel position. As an electronic assembly, a fresh module restores steering response where a failed unit produces steering faults or loss of steer.
Steering input from the operator is translated into commanded output for the steer circuit by this steer control module, the electronic assembly that processes the signals directing wheel position on an electric lift truck. It reads the operator's steering demand and drives the steer system to match, so the wheels track the input accurately.
Mounted in the steering control area, the module is a sealed electronic unit, and when it fails the truck throws steering faults or loses steer response until the module is replaced. Because the fault is electronic rather than mechanical, a module that has failed does not recover and is swapped as a unit.
Match the connector layout and the module configuration to the existing part when selecting a replacement, since steer control modules vary in these details and the replacement must match the truck's steering circuit to function.
| Type | Module Steer Control |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 3.80 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR144232R |
|---|---|
| Product ID | 14674 |
| Short Link | https://forkliftsetc.net/?p=14674 |
| Part Number |
|---|
| CR144232R |
