$71.34
Raymond locking nut built to resist backing off under vibration, holding its clamp on a threaded fastener where a standard nut would loosen over a duty cycle. On equipment that vibrates continuously, a nut that stays put is what keeps a critical joint from working loose in service, using its locking feature to keep tension on the joint.
Built to resist backing off under vibration, this Raymond locking nut holds its clamp on a threaded fastener where a standard nut would loosen over a duty cycle, using its locking feature to keep tension on the joint. On equipment that vibrates continuously, a nut that stays put is what keeps a critical joint from working loose in service.
Match the thread diameter and pitch to the stud or bolt it threads onto, since a locking nut right in size but wrong in pitch will not run on, and confirm it is the locking style the joint calls for.
| Type | Nut-Locking |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1020548-006 |
|---|---|
| Product ID | 14605 |
| Short Link | https://forkliftsetc.net/?p=14605 |
| Part Number |
|---|
| RA1020548-006 |
