$0.75
Raymond specifies this nut for the chassis hardware of their lift trucks, where it threads onto a bolt or stud to secure the assembly. Run down and torqued, it clamps the connected parts together and holds them tight against the working loads the truck carries through its daily service.
Raymond specifies this nut for the chassis hardware of its lift trucks, where it threads onto a bolt or stud to secure the assembly. Match the thread diameter and pitch to the bolt it threads onto, since a nut right in diameter but wrong in pitch will not run on.
| Type | Nut |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.20 |
| Length (in) | 1.00 |
| Width (in) | 1.00 |
| Height (in) | 0.6 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA5-015-008 |
|---|---|
| Product ID | 12038 |
| Short Link | https://forkliftsetc.net/?p=12038 |
| Part Number |
|---|
| RA5-015-008 |
