$2.00
This Raymond O-ring is the round elastomer seal that closes a static or dynamic joint on Raymond lift trucks, typically sealing a hydraulic fitting, port, or bore against leakage. It seats in a groove and is squeezed between the mating faces to block fluid from passing. As a wear item, the elastomer hardens, takes a set, or nicks over time, and the joint weeps until it is replaced.
An O-ring seals a static or dynamic joint by seating in a groove and being squeezed between the mating faces, blocking fluid or pressure from passing where two parts meet. In hydraulic service it commonly seals a fitting, a port, or a bore against leakage.
An O-ring is a wear item. The elastomer hardens, takes a compression set, or nicks over time, and the joint then weeps until the ring is renewed. Match the ring's inside diameter, cross-section, and material to the groove it seats in, since an O-ring the wrong size or compound will not seal and can fail quickly under pressure.
| Type | O-Ring |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1019307-85 |
|---|---|
| Product ID | 11071 |
| Short Link | https://forkliftsetc.net/?p=11071 |
| Part Number |
|---|
| RA1019307-85 |
