$31.94
This Hyster pin serves as a pivot or retaining pin in a mechanical joint, holding two components in alignment while allowing or fixing their relative movement. As a Hyster OEM part it is machined to the diameter and length of its original location, so it seats without wallowing the joint the way a pin loose in its bore does over time.
This Hyster pin serves as a pivot or retaining pin in a mechanical joint, holding two components in alignment while allowing or fixing their relative movement. As a Hyster OEM part, it is machined to the diameter and length of its original location. Match the pin diameter, length, and any retaining feature to the pin being replaced, since a pin loose in its bore wallows the joint over time.
| Type | Pin |
|---|---|
| Weight (lbs) | 0.25 |
| Length (in) | 0.60 |
| Width (in) | 0.85 |
| Height (in) | 1.8 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HY2062561 |
|---|---|
| Product ID | 11718 |
| Short Link | https://forkliftsetc.net/?p=11718 |
| Part Number |
|---|
| HY2062561 |
