$11.05
Used on Raymond lift trucks, this Raymond pin holds a part or joint in place where it passes through a drilled hole, working as a basic retaining and locating element in the chassis. It carries or aligns the connection it seats through, holding the joint in position under load.
Used on Raymond lift trucks, this Raymond pin holds a part or joint in place where it passes through a drilled hole, working as a basic retaining and locating element in the chassis. Set the replacement against the original and match its diameter and length before you drive it home.
| Type | Pin |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
| Length (in) | 0.40 |
| Width (in) | 1.05 |
| Height (in) | 1.8 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1010323 |
|---|---|
| Product ID | 11308 |
| Short Link | https://forkliftsetc.net/?p=11308 |
| Part Number |
|---|
| RA1010323 |
| SY99-04792 |
