$20.34
Holding two parts together at a joint that still needs to move, this Raymond pin passes through aligned bores so a linkage, lever, or clevis can pivot on it rather than being locked solid the way a bolt would hold it. It replaces the original, with fit set by diameter, length, and whether a cotter, clip, or groove retains it.
A pin holds two parts together at a joint that still needs to move, passing through aligned bores so a linkage, lever, or clevis can pivot on it rather than being locked solid the way a bolt would hold it. This Raymond pin replaces the original in the assembly it serves, doing the single job of locating and retaining the parts it runs through.
Fit is set by the pin's diameter and length and by how it is retained, whether a cotter, a clip, or a groove holds it in place, so the pin being replaced is the reference for the new one. Match the diameter, the length, and the retaining feature so the pin seats fully in its bore and stays captured against the vibration of a working truck.
| Type | Pin |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1017291 |
|---|---|
| Product ID | 15289 |
| Short Link | https://forkliftsetc.net/?p=15289 |
| Part Number |
|---|
| RA1017291 |
| SY99-01304 |
| SY9901304 |
