$3.17
This Yale spiral clamping pin is a 32 by 4 millimeter spiral-wound roll pin that locates and retains a shaft, lever, or linkage on Yale lift trucks. Rolled from spring steel into a coiled cylinder, it compresses as it drives into a bored hole and springs back to hold the parts it joins without a separate fastener. Replace it once driven out for service, since it loses its spring grip.
The Yale spiral clamping pin is a 32 mm by 4 mm spiral-wound roll pin that functions as a locating and retaining pin on Yale lift trucks. A spiral pin is rolled from spring steel into a coiled cylinder so it compresses as it drives into a bored hole and springs back against the walls, holding itself and the parts it joins in place without a separate fastener.
It is used where a shaft, lever, or linkage needs a shear pin that stays seated under vibration, and the coiled construction spreads load around the full circumference rather than along a single seam, which is why it resists the fretting and shearing that split a straight pin.
Replace it whenever it is driven out for service, since a pin that has been pressed in and knocked back out loses its spring grip. Forklifts Etc. carries it as the replacement spiral pin for the Yale application.
| Type | Pin |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | YT502677909 |
|---|---|
| Product ID | 14649 |
| Short Link | https://forkliftsetc.net/?p=14649 |
| Part Number |
|---|
| 800052804 |
| AE012901 |
| AE12901 |
| CL2033691 |
| CLHY2033691 |
| CT12901 |
| CTA0000-28368 |
| CTA000028368 |
| HY2033691 |
| HY502677909 |
| MB12901 |
| MBA0000-28368 |
| MBA000028368 |
| NIAL012901 |
| SY28845 |
| TCAL012901 |
| UKA000028368 |
| UKAL012901 |
| YT502677909 |
