$190.91
The Raymond pivot block anchors a rotating shaft or lever and holds it in alignment while it turns under load, serving as a fixed pivot point in a lift truck linkage. A worn or elongated block introduces play that surfaces as sloppy response or uneven wear at the steering, brake, or control linkage it carries. Fitting a fresh block restores the tight pivot the assembly needs.
Machined to serve as a fixed pivot point in a Raymond lift truck linkage, this pivot block anchors a rotating shaft or lever and holds it in alignment while it turns under load. Raymond builds it as a genuine replacement for the original, so the mounting bores and bearing surfaces match the geometry the linkage was designed around.
A worn or elongated pivot block introduces play into whatever it carries, whether a steering, brake, or control linkage, and that slack shows up as sloppy response or uneven wear at the connected parts. Fitting a fresh block restores the tight pivot the assembly needs to move cleanly. Match the bore and mounting pattern to the block coming off, since pivot blocks are cataloged to a specific linkage position and are not interchangeable across the truck.
| Type | Pivot Block |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1110867 |
|---|---|
| Product ID | 14872 |
| Short Link | https://forkliftsetc.net/?p=14872 |
| Part Number |
|---|
| RA1110867 |
