$1,211.05
The Raymond pivot gives a linkage or lever a defined axis to turn on, holding the tight, positive action the mechanism was built for. As the original wears, the movement it controls develops play, so a fresh pivot restores that precise motion. Built as a direct Raymond replacement for the pivot in that position, sold individually.
Raymond machines this pivot for the joint where one part turns against another inside its lift trucks, giving a linkage or lever a defined axis to rotate around. It carries the load at that joint while holding the mating parts concentric, so the movement it controls stays tight and positive rather than sloppy.
As the pivot wears, the bearing surface loses material and the joint develops play, which shows up as loose or imprecise action in the mechanism it serves. Fitting a fresh Raymond pivot restores the close fit and clean rotation the design was built for, and it installs as a direct replacement for the pivot already in that position, sold individually.
Match the pivot by its diameter and length to the bore and linkage it seats in, since a pivot wrong in either dimension will not hold the joint at the correct clearance.
| Type | Pivot |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1038971 |
|---|---|
| Product ID | 15371 |
| Short Link | https://forkliftsetc.net/?p=15371 |
| Part Number |
|---|
| RA1038971 |
